Read the Progressive Dairyman Canada digital edition
advertisement

Maintain effective fibre for better feed efficiency

Cathal Bohane for Progressive Dairyman Published on 29 March 2019
Maintain effective fibre for better feed efficiency

As nutritionists, we once thought adding the correct level of neutral detergent fibre (NDF) to the diet was all that was required to create a healthy rumen and thus allow the protein and energy contained within the diet to be used to produce milk.

This theory still holds true, but over the years, we have been seeing a bigger role for the part that fibre plays, the type of fibre and more importantly how this is processed in your mixer wagon.

advertisement

advertisement

Research in the area of total mixed rations (TMR) has shown differences in performance that were unexplained by energy, protein, minerals and other nutritional parameters.

There are various chemical and physical factors, such as the particle size of the feed, that affect rumen fermentation and as a result influence milk production and composition.

While harvesting forages at the proper chop length is critical, additional attention should be paid to the process of feed mixing, as it may result in large effects on diet particle size and uniformity.

In simple terms, we were beginning to see that the type of fibre and the way this fibre was processed in the TMR mixer were influencing overall production of the animals.

On-farm studies over a number of decades have showed a 0.5-kilogram increase in milk with 0.7 kilogram less dry matter intake (DMI) after mixing the exact same diet and ingredient proportions in two different ways.

advertisement

This backs up the hypothesis that balancing your ration is important, but the quality of the mix you produce is equally as important. This has been further supported with a study carried out at the University of Reading in the United Kingdom.

We know the optimal rumen pH is 6, and this research showed the pH of the rumen of the animal could be kept above 6 for 33 percent longer by using the exact same diet in the same proportions, but just by mixing the diet in two different ways.

These changes can be linked back to the effectiveness of the fibre contained within the TMR mix rather than just the length. Some of the diets outlined above had fibre components, such as straw and hay, that were much longer than would be considered normal.

These diets had 2 to 4 percent of long fibre processed to 3 to 7 centimetres, depending on the forages being used in conjunction with them.

As previously outlined, cows were milking more and eating less, resulting in an overall improvement in feed efficiency. This has a direct effect on margin, compared to maximizing DMI to achieve better milk yields.

It was becoming quite clear there was a distinct difference between the NDF fibre and the physically effective fibre (peNDF) in the diet. A term sometimes called “scratch factor” was used when describing a diet that was more physically effective.

advertisement

This physical effectiveness stimulated the rumen, which caused the rumen to contract, mixing the contents and stimulating cud chewing. Increased cud chewing generated more saliva and thus more buffering capacity for the rumen.

Another way to show the effect of the scratch factor would be to see the difference between straw and soy hulls. They both had similar NDF levels, but one was more physically effective compared to the other.

It is now understood that if we could retain the structure and consistency of this ingredient within the TMR mixer, this would allow us to create a stable rumen environment.

This stable rumen environment has been shown to achieve 10 percent more production from the same amount of feed through greater feed efficiency by just maintaining the effective fibre in our TMR mixes.

Effective fibre is not new, and Mertens in 1997 related chewing activity to both NDF concentration and particle size, and proposed the concept of peNDF, which is fibre that could have a physical effect on the rumen of the animal.

This research backed up the previous work that particle size is the major factor determining peNDF, but the length of this fibre was important because putting in long fibre that animals sort out and do not eat will not solve the problem or create an improvement.

Also, the concept of peNDF was originally defined from an analytical perspective as the proportion of the original sample NDF greater than 1.18 millimetres, whereas some would have counted peNDF as that which is more than 3 centimetres.

To reiterate a previous point, while effective fibre involves the length of the fibre, it also relates to fibre type, chop type and its overall consistency and distribution in the diet, on which the mixer wagon has a major effect.

There has been further research in recent years to support the concept of physically effective fibre, its length and its importance in rumen function.

Beauchemin (2008) fed small amounts of cereal straw (greater than 0.5 kilograms per day) as a source of structural fibre. When straw of suitable length (4 to 8 centimetres) and structure was fully incorporated into mixed rations, encouraging animal performance results were noted.

In contrast, providing soft ryegrass straw as a ground-pelleted or coarse-chopped cubed feed to cows grazing high-quality pasture showed no positive effects on milk production, milk composition, rumen pH or time spent ruminating per unit of DMI.

Also in a study of 600 U.K. dairy farms with TMR feeding, all-year-round calving, similar days in milk and a nutritionist to balance their diets, the farms having more control over chop type and consistency in their TMR mixer produced more milk.

As shown in Figure 1, the increased milk over a full lactation was 1,373 pounds (623 kilograms) or an extra 99 pounds (45 kilograms) of milk solids per cow.

increased milk over a full lactation

The next step in the journey was to understand what this effective fibre was doing to the animal or, more importantly, the rumen of the animal. 

Figure 2 gives us an overview of what is happening when we supply under- and over-processed fibre in an inconsistent way to cows as opposed to a mix that adheres to ideal principles for length, type and consistency in the mix.

supply under- and over-processed fibre in an inconsistent way to cows

As we strive for higher levels of production, there has been increasing emphasis placed on achieving higher quality and digestible forages. The fibre content of these forages now acts more like soluble carbohydrate, so there is a need for effective long fibre to be added.

These outlined results confirm the importance of mix quality in the ration to achieve optimal rumen function. When suitable long fibres, such as straw or mature hay, are correctly processed and incorporated into well-mixed rations, minimization of sorting ensures more consistent ration consumption.

There are generally three diets fed on the farm: the one the nutritionist created, the one the farmer thinks he or she fed, and the one the cows actually eat. These can be very different diets on some farms, which is concerning. To reduce this error on farms, we need to constantly review and check the following in the mixing process:

1. Working condition of the mixer wagon – blades, weighing system, etc.

2. Loading order of ingredients

3. Margin for error in the loading of individual ingredients

4. Mixing times

5. Post-examination of TMR feedout for:

  • Moisture level

  • Chop length and type – is there effective fibre in there, not just NDF?

  • Consistency – Penn State separator

  • Sorting present during the following 24 hours

  • Residuals and refusals

We know fibre plays a major role in the health of the rumen and thus the animal, but it also has a major role to play in the production of the animal.

Fibre is not just about NDF, it is about the fibre type, chop length, chop type and overall consistency of the mix, or more importantly, how “effective” this is.

Your mixer wagon and operator play a major role in maintaining the fibre through the mixing process, and only until we achieve this can we truly reach the potential of our diet.  end mark

For further information, contact Nathalie Thibodeau, Alltech customer service representative, at (450) 253-0779 or email Nathalie Thibodeau.

References omitted but are available upon request. Click here to email an editor.

PHOTO: A closer look at effective fibre, its direct relation to improved milk production and why proper TMR mixing matters. Courtesy photo.

Cathal Bohane
  • Cathal Bohane

  • Head of InTouch Nutrition
  • Keenan
  • Email Cathal Bohane

LATEST BLOG

LATEST NEWS